Single in line Pin headers and female socket connectors in 2 to 20 contacts. Capable of 7.9A per circuit (at 30°C) with a dielectric withstanding voltage of 1000V AC and operating temperature range of -55°C to 105°C. Mated board to board connector pairs offer 100 insertion cycles durability.
Available through hole (TH) and surface mount (SMT). Headers and sockets available in both vertical and horizontal orientation. Pin spacing is 5.08mm (.200") between pins and rows.
Pin headers are available in SMT or thru hole with vertical and horizontal orientation. Pin headers allow a customisable pin length with a square pin size of 1.14mm (.044").
Elevated PCB headers offer parallel PCB stacking solutions up to 39mm (1.535") between boards.
PCB sockets are available in SMT or thru hole in vertical orientation.
SMT receptacles offer a reliable dual contact design and dual entry PCB mating options: Pin headers are mated with receptacles from above to achieve standard parallel PCB mating. In bottom entry mode holes are drilled in the PCB and the header pins enter the socket from below via the underside of the PCB.
Bottom entry offers alternative design solutions, for example achieving a very low parallel PCB stacking height by mounting the socket on top of the PCB, the stack height is the header insulator, as low as 2.54mm (.100"). Alternatively bottom entry allows connection of three PCB’s using a pass thru technique, where a long header pin mates with two PCB sockets, passing all the way through the middle socket.
Tube or Tape and reel packaging (with or without film or caps) for pick and place assembly, is available on all surface mount 5.08mm connectors.
All GradConn board to board connectors are RoHS compliant and suitable for high temperature processing, see downloadable drawings and product specification for more details.