Read More
Hide Text

Pin headers and female socket connectors in 0.8mm x 1.20mm are available in 6 to 100 contacts. Capable of 0.5A per circuit with a dielectric withstanding voltage of 300V AC and operating temperature range of -40°C to 105°C. Mated board to board connector pairs offer 100 insertion cycles durability.

Dual row, straight, surface mount (SMT) configuration allow parallel PCB stacking. Pin spacing is 0.8mm (.031") between pins and 1.2mm (.047") between rows. Suitable for one hundred connector mating cycle durability.

Vertical PCB headers with exposed contacts BB02-AY and AW are available with an optional plastic locating peg to aid SMT placement, positioning and strength post soldering. BB02-AW is a stacking header with 2.4mm – 12.80mm stacking profile. Add the height of the socket in top entry applications to find the total PCB stack height. Pin headers allow a customisable pin length and have a square pin size of 0.30mm.

Vertical PCB receptacle BB02-AZ has a locating peg and is suitable for dual entry, pin headers can be plugged from above for standard parallel PCB mating, whilst in bottom socket entry mode holes are drilled in the PCB and the pin header entry through the PCB and from below, this offers an alternative PCB design solutions with a very low PCB stacking height.

Tube or Tape and reel packaging (with or without film or caps) for pick and place assembly, is available on all 0.8 x 1.2mm connectors.

All GradConn board to board connectors are RoHS compliant and suitable for high temperature processing, see downloadable drawings and product specification for more details.

Filter Options (Products Shown: 3)

Mount Type
Through hole
0
Thru hole SMT compatible
0
Orientation
Right angle
0
U shaped
0
Number of Rows
Single
0
Triple
0
Quad
0
Elevated?
Socket Contact Style
Tuning fork
0
Locating Peg?
Polarised?
Yes
0
0.8mmx1.2mm Dual row, Surface mount Header (Male) - BB02-AW
Active
0.8mmx1.2mm elevated pin header
6 to 100 contacts
Straight, Header (Male), Dual row, surface mount connector
Stacking Profile: 2.40mm - 12.80mm
Optional locating peg
Available in tape and reel packaging
BB02-AW
0.8mmx1.2mm Dual row, Surface mount Header (Male) - BB02-AY
Active
0.8mmx1.2mm board stacker
6 to 100 contacts
Straight, Header (Male), Dual row, surface mount connector
Optional locating peg
Insulator Height: Customisable insulator height
Custom pin lengths
BB02-AY
0.8mmx1.2mm Dual row, Surface mount Socket (Female) - BB02-AZ
Active
0.8mmx1.2mm board stacker
6 to 100 contacts
Straight, Socket (Female), Dual row, surface mount connector
Dual entry (top and bottom entry)
Contact Style: Leaf spring
Optional locating peg
Insulator Height: 3.00mm high insulator
BB02-AZ
By using this site you consent to the use of cookies. See our privacy policy for more information.
Close