Read More
Hide Text

Coaxial Cable Assemblies with Hirose-W.FL (W.FL-LP-040) Connectors

GradConn offer a selection of cable assemblies including the Hirose W.FL (W.FL-LP-040) connector. The most popular choices are for the opposite end of the Hirose RF cable assembly are SMA female or FME male bulkhead connectors. This allows customers to mount the SMA or FME interface connectors to a bulkhead with a cut out and plug in an antenna or further extension cable on the other side of the bulkhead. Find further information on the Hirose WFL connectors below:

Hirose W.FL connector features:

  • Mated height: 1.4mm (1.55mm max).
  • PCB occupied area: 3.4 sq.mm.
  • Light weight: Receptacle: 5.6mg.  Right angle plug: 18.6mg.
  • High frequency transmission: Up to 6GHz. V.S.W.R.: 1.3 max., from DC to 3GHz.
  • Impedance (ohm): 50
  • Simple mating and un-mating: Tools are available from Hirose distributors.
  • Suitable for 20 mating cycles.
  • Temperature range: -40 to 90 degrees centigrade.
  • Centre Conductor Plating: Gold
  • PCB mount type: SMT
  • Applications: Mobile phones, Radio communications equipment, Measurement equipment, PDA, GPS, Wireless LAN, Bluetooth

As an alternative to Hirose WFL GradConn offer the I-Pex MHFIII range. The MHF3 is a high quality and economical connector is intermatable with Hirose W.FL. This means a customer can plug an I-PEX MHFIII cable assembly into a Hirose PCB connector. Customer’s should test samples to approve the use of I-Pex, however GradConn have many satisfied customers after swapping from Hirose.

Visit the Hirose website for more information.

Alternatively, you can build a cable assembly with the Hirose W.FL connector.

Specifications are subject to change without notice. Please consult the manufacturer for the most up to data information.

Filter Options (Products Shown: 4)

Connector Filters
Other Filters
Frequency (up to)
DC to 1GHz
0
Cable Group
By Diameter
4
RG Type
0
Cable Loss
Low Loss
0
Hirose W.FL Right Angle Plug to SMA Straight Jack Rear mount - CABLE 040 RF
Active
Connector A: Hirose W.FL (alternative to Ipex MHF III)
Connector A Hirose Part Number/s: W.FL-LP-040
Connector B: SMA straight bulkhead jack
Cable Options: 0.81mm ø
Working Frequency Range: DC to 3GHz
Economic Alternative:CABLE 039 RF
CABLE 040 RF
Hirose W.FL Right Angle Plug to SMA Straight Plug Free Hang mount - CABLE 119 RF
Active
Connector A: Hirose W.FL (alternative to Ipex MHF III)
Connector A Hirose Part Number/s: W.FL-LP-040
Connector B: SMA straight plug
Cable Options: 0.81mm ø
Working Frequency Range: DC to 6GHz
Economic Alternative:CABLE 118 RF
CABLE 119 RF
Hirose W.FL Right Angle Plug to Hirose W.FL Right Angle Plug - CABLE 128 RF
Active
Connector A: Hirose W.FL (alternative to Ipex MHF III)
Connector A Hirose Part Number/s: W.FL-LP
Connector B: Hirose W.FL (alternative to Ipex MHF III)
Connector B Hirose Part Number/s: W.FL-LP
Cable Options: 0.81mm ø
Working Frequency Range: DC to 6GHz
Economic Alternative:CABLE 081 RF
CABLE 128 RF
Hirose W.FL Right Angle Plug to SMA Straight Jack Reverse Polarity (RP) Rear mount - CABLE 130 RF
Active
Connector A: Hirose W.FL (alternative to Ipex MHF III)
Connector A Hirose Part Number/s: W.FL-LP
Connector B: SMA straight bulkhead jack reverse polarity (RP)
Cable Options: 0.81mm ø
Working Frequency Range: DC to 3GHz
CABLE 130 RF
By using this site you consent to the use of cookies. See our privacy policy for more information.
Close