Samtec Cross Reference
| Find
your Samtec part quickly Find the Samtec part number and click it to find our alternative:- |
Busy? Let GradConn take the strain. Send an e-mail to us with your request and let GradConn cross refer your competitor parts for you. |
| Samtec Series | GradConn Series Alternative | Thumbnail |
Remark | |||
| ASP | Send drawing | Samtec special part, please contact GradConn, drawing required. | ||||
| BBD Socket Strip | N/A | GradConn cannot offer. | ||||
| BBL Socket Strip | N/A | GradConn cannot offer | ||||
| BBS Socket Strip | N/A | GradConn cannot offer. | ||||
| BCS-D-DE | N/A | GradConn cannot offer. | ||||
| BCS-D-HE | BB02-JM |  |
Samtec connector is 0.18mm shorter in height than GradConn alternative. PCB diameter, GradConn 1.00mm  min, Samtec .71mm min. |
|||
| BCS-D-PE | BB02-KM-G | |
 |
Samtec
connector is 0.63 shorter in height than GradConn alternative PCB diameter, GradConn 1.00mm min, Samtec .71mm min. |
||
| BCS-D-TE | BB02-KH | |
GradConn PCB diameter 1.0mm , Samtec .71mm min. Samtec part is slightly higher |
|||
| BCS-S-DE | N/A | GradConn cannot offer. | ||||
| BCS-S-HE | BB02-JJ | |
PCB diameter, GradConn 1.0mm min, Samtec .71mm min |
|||
| BCS-S-PE | BB02-JL | |
GradConn PCB diameter 1.0mm min, Samtec .71mm min. |
|||
| BCS-S-TE | BB02-JF | |
|
|||
| BHS Socket Strip | N/A | GradConn cannot offer. | ||||
| BSW | BB02-JL | |
Different style of socket, pcb change required. | |||
| CES-S | BB02-JE | |
||||
| CLE | N/A | GradConn cannot offer. | ||||
| CLH-D-DV/BE | BB02-KY | |
||||
| CLH-D-TE | BB02-KZ | |
 |
|||
| CLP-D | BB02-CQ | |
||||
| CLP-DH | BB02-CX | |
 |
Larger connector and PCB layout than Samtec | ||
| CLT-01 | BB02-GM | |
Thru hole. GradConn part higher profile. | |||
| CLT-02 | BB02-RG | |
SMT. Samtec has smaller SMT footprint, pass through holes the same. Choose locating peg option ‘C’ to match Samtec. | |||
| DW-D | BB02-HK | |
Choose Nylon 6T option. | |||
| DW-S | BB02-HD | |
||||
| DWM-D | BB02-DB | |
||||
| DWM-S | BB02-BQ | |
||||
| EHT | N/A | GradConn cannot offer. | ||||
| ESS | N/A | GradConn cannot offer. | ||||
| ESD Socket Strip | N/A | GradConn cannot offer. | ||||
| ESQ-D | BB02-KD | |
||||
| ESW-D | BB02-KD | |
||||
| ESW-S | BB02-JC | |
||||
| ESW-T | BB02-LB | |
||||
| EW-S | BB02-HD | |
Choose Nylon 6T option. | |||
| EW-D | BB02-HK | |
Choose Nylon 6T option. | |||
| FLE-DV | BB02-CL | |
Samtec 4.55mm high, GradConn 4.6mm. Samtec SMT Lead 4.6mm wide, GradConn 4.8mm wide. Samtec peg diameter 0.736mm, GradConn 1.0mm. | |||
| FSH | N/A | GradConn cannot offer. |
||||
| FTE-DV | N/A | Gradconn cannot offer a direct alternative, see our 0.8mm products for options. | ||||
| FTM | BB02-YF | |
Choose ‘B’ height option: 13 Choose ‘H’ option: 1. | |||
| FTMH | BB02-YF | |
Choose ‘B’ height option: 18 Choose ‘H’ option: 0. | |||
| FTR-D | BB02-DF | |
|
|||
| FTR-S | BB02-BM | |
GradConn height is 1.5mm, Samtec 1.27mm. Samtec SMT lead 5.8mm, GradConn 5.5mm. Shrouding options not available. | |||
| FTS-D | BB02-BC | |
Choose GradConn insulator height option F = 1.00mm (lowest), Samtec is 0.85mm. Shrouding options not available. | |||
| FTS-DV | BB02-BS | |
GradConn height is 1.5mm, Samtec 1.27mm. Samtec SMT lead 5.8mm, GradConn 5.5mm. Shrouding options not available. | |||
| FTSH-D | BB02-BC | |
Thru-hole Choose insulator height option: A |
|||
| FTSH-DH | BB02-NE | |
Samtec is LCP, GradConn is Nylon 6T | |||
| FTSH-DV | BB02-BS | |
Samtec is LCP, GradConn is Nylon 6T. Choose height option D | |||
| FW-D 01, 02 and 04 | BB02-BP | |
Thru hole | |||
| FW-D 03 and 05 | BB02-BK | |
SMT | |||
| HLE-DV | BB02-KY | |
||||
| HLE-DV-TE | BB02-KZ | |
|
|||
| HMTSW | BB02-HE | |
Choose Nylon 6T option, Samtec is LCP. | |||
| HTS | N/A | GradConn cannot offer. | ||||
| HTSW-D | BB02-HE | |
Choose Nylon 6T version, Samtec is LCP | |||
| HTSW-S | BB02-HA | |
Choose Nylon 6T version, Samtec is LCP | |||
| HW-D | BB02-HK | |
Choose Nylon 6T version. | |||
| IDMD | 2.00 cable | Contact GradConn | ||||
| MEC | N/A | GradConn cannot offer | ||||
| MLE | BB02-WA | |
Samtec is pass thru, different PCB layout, different peg size, different height | |||
| MS-01-DH | BB02-GY | |
Alternative for Samtec dual row horizontal surface mount version | |||
| MMS-01-DV | BB02-GH | |
Choose B option. gradconn 4.3mm vs Samtec 4.45mm height, GradConn for .8mm (+/- .05mm) vs Samtec .711mm hole dia. |
|||
| MMS-01-SH | N/A | GradConn cannot offer. | ||||
| MMS-01-SV | BB02-GD | |
Thru hole. Body height on Samtec part slightly higher | |||
| MMS-02-DV | BB02-GJ | |
||||
| MMS-02-SV | BB02-GS | |
Samtec part is higher by 0.2mm than GradConn alternative | |||
| MMT-DH | BB02-RH | |
 |
|||
| MMT-SH | BB02-FK | |
||||
| MTLW-S | BB02-HC | |
Choose the Nylon 6T option. | |||
| MTMM-D | BB02-FD | |
Choose the Nylon 6T option, Samtec is the LCP. | |||
| MTMM-Q | BB02-FY | |
||||
| MTMM-S | BB02-FB | |
Choose A insulator option, choose Nylon 6T for high temp. Samtec is LCP. | |||
| MTMS-D | BB02-DA | |
||||
| MTMS-S | BB02-BL | |
||||
| MTSW-D | BB02-HE | |
||||
| MTSW-S | BB02-HA | |
Choose the Nylon 6T option. | |||
| MTSW-T | BB02-HL | |
||||
| MW | BB02-YH | |
Different PCB layout, Samtec is LCP, GradConn is Nylon 6T | |||
| PLCC | N/A | GradConn cannot offer | ||||
| QSE | N/A | GradConn cannot offer | ||||
| QSH | N/A | GradConn cannot offer | ||||
| QTE | N/A | GradConn cannot offer | ||||
| QTH | N/A | GradConn cannot offer | ||||
| RSM-D | BB02-EB | |
Samtec part is 0.1mm higher and the pin length is 0.1mm longer on the board than GradConn alternative | |||
| SDL | N/A | GradConn cannot offer | ||||
| SFC-T1 | BB02-CU | |
 |
Not exact alternative | ||
| SFC-T2 | BB02-CM | |
 |
Not exact alternative | ||
| SFM-D | BB02-CM | |
Surface mount, Samtec alignment peg is one size, GradConn is two sizes, please check. | |||
| SFMC-02 | BB02-LC | |
Surface mount, GradConn 1mm lower in height, PCB tails not slotted | |||
| SFMC | BB02-CN | |
Thru-hole. Samtec pin length is 0.4mm shorter than GradConn alternative. | |||
| SFM-D | BB02-CU | |
Thru-hole | |||
| SFMH | N/A | GradConn cannot offer. | ||||
| SL | N/A | GradConn cannot offer | ||||
| SLM-D | BB02-EA | |
||||
| SLM-S | BB02-CF | |
||||
| SLW-D | BB02-JE | |
GradConn pins are suitable for 1.02mm vs Samtec suitable for .86mm PCB diameter hole |
|||
| SLW-S | BB02-KF | |
GradConn pins are suitable for 1.02mm vs Samtec suitable for .86mm PCB diameter hole |
|||
| SMS-D | BB02-EC | |
Samtec part has wider housing than GradConn alternative | |||
| SMS-S | BB02-CE | |
Samtec part has wide housing and shorter solder tail than GradConn alternative | |||
| SQT-D | BB02-RL-S | |
||||
| SQT-D-RA | BB02-RL-R | |
||||
| SQT-S-RA | BB02-RK-R | |
||||
| SQT-S | BB02-RK-S | |
||||
| SQW-D-VS | BB02-RJ | |
||||
| SQW-D | BB02-RL | |
GradConn pins are suitable for 0.85mm vs Samtec 0.71mm diameter PCB hole.
|
|||
| SQW-Q | BB02-GA | |
 |
GradConn pins are suitable for 0.8mm vs Samtec 0.71mm PCB diameter |
||
| SQW-T | Contact GradConn | Triple row. | ||||
| SS | N/A | GradConn cannot offer. | ||||
| SSA | N/A | GradConn cannot offer. | ||||
| SSM-DH | BB02-KQ | |
 |
|||
| SSM-DV | BB02-KU | |
||||
| SSM-SH | BB02-JR | |
 |
|||
| SSM-SV | BB02-JG | |
 |
|||
| SSQ-D Right Angle | BB02-KA | |
 |
Choose Nylon 6T option for high temp. GC pins .6mm x.4mm vs .64mm sq but fit in same pcb 1.02mm diameter hole. |
||
| SSQ-D Straight | BB02-KA | |
|
Choose Nylon 6T option for high temp. GC pins .6mm x.4mm vs .64mmsq but fit in same pcb 1.02mm diameter hole. |
||
| SSQ-S Right Angle | BB02-JB | |
|
|||
| SSQ-S Straight | BB02-JF | |
 |
|
||
| SSW-D | BB02-KK | |
||||
| SSW-D-VS | BB02-KU | |
Dual row STM. Samtec 9.78mm vs GradConn 7.5mm profile | |||
| SSW-S | BB02-JB | |
||||
| SSW-S-VS | BB02-JG | |
 |
Surface mount | ||
| SSW-T | BB02-LA | |
||||
| STMM | BB02-FP | |
|
|||
| STMM-RA | BB02-FQ | |
|
|||
| TCSD | Cable Assembly | 2.00 IDC, contact GradConn | ||||
| TFM-D | BB02-BE | |
Samtec part is slightly bigger, the GradConn part has longer pins | |||
| TFM-D | BB02-BY | |
Samtec part is slightly bigger than GradConn alternative
|
|||
| TFM-D-RA | BB02-BZ | |
||||
| TLE | BB02-GQ | |
Choose B option for 4.5mm height, Samtec is LCP, GradConn Nylon 6T | |||
| TLW-D | BB02-HJ | |
||||
| TLW-S | BB02-JC | |
Choose the Nylon 6T option | |||
| TMM (D - Dual row TH version) | BB02-FD | |
The insulator on the Samtec part is 1.5mm high, the GradConn insulator is 2.0mm high | |||
| TMM (D - Dual row SMD version) | BB02-FE | |
||||
| TMM-S | BB02-FB | |
||||
| TMS-D | BB02-DA | |
GradConn part has different pin shape and diameter | |||
| TMS-S | N/A | GradConn cannot offer | ||||
| TS | N/A | GradConn cannot offer | ||||
| TSM-D-RA | BB02-DE | |
||||
| TSM-DV | BB02-HP | |
For exact insulator height choose Dimension B, option B | |||
| TSM-SH | BB02-TA | |
||||
| TSM-SV | BB02-HY | |
Single row vertical SMT | |||
| TST | BB02-HQ | |
|
|||
| TSW-D | BB02-HE | |
||||
| TSW-S | BB02-HA | |
||||
| TSW-T | BB02-HL | |
||||
| TW-D | BB02-FF | |
||||
| TW (S - single row version) | BB02-FC | |
||||
| TW-D-SM | BB02-FU | |
||||
| TW-S-SM | N/A | GradConn cannot offer | ||||
| ZW-D | BB02-HK | |
Choose the Nylon 6T option. |
|||
| ZW-S | BB02-HD | |
||||
