Hirose ufl rf cable assemblies
About Hirose U.FL series
GradConn offer a selection of cable assemblies including the Hirose U.FL connector. The most popular choices are for the opposite end of the Hirose RF cable assembly are SMA female or FME male bulkhead connectors. This allows customers to mount the SMA or FME interface connectors to a bulkhead with a cut out and plug in an antenna or further extension cable on the other side of the bulkhead. Please find further information on the Hirose UFL connectors below:
Hirose U.FL connector features:
Mated height: 1.9mm or 2.4mm (max 2.0 or 2.5mm).
PCB occupied area: 7.7 sq.mm.
Light weight: Receptacle: 15.7mg.
Right angle plug: 59.1mg.
High frequency transmission: Up to 6GHz. V.S.W.R.: 1.3 to 1.5 max., from DC to 3GHz.
Impedance (ohm): 50
Tactile lock feeling confirms fully mated condition.
Simple mating and un-mating: Tools are available from Hirose distributors.
Temperature range: -40 to 90 degrees centigrade.
Centre Conductor Plating: Gold
PCB mount type: SMT
Applications: Mobile phones, PHS, Radio communications equipment, Measurement equipment, GPS, Wireless LAN, Bluetooth and any other application requiring high frequency transmission using small coaxial connectors.
As an alternative to Hirose UFL GradConn offer the I-Pex MHF range. The MHF is a high quality and economical connector is intermatable with Hirose U.FL. This means a customer can plug an I-PEX MHF cable assembly into a Hirose PCB connector. Customer's should test samples to approve the use of I-Pex, however GradConn have many satisfied customers after swapping from Hirose.
View the report showing the intermatability between Hirose U FL and I-Pex MHF connectors.
Visit the Hirose website for more information.
For further information about GradConn's Hirose U.FL cross reference, please contact GradConn
Specifications are subject to change without notice. Please consult the manufacturer for the most up to data information.
Hirose U.FL Cable Assemblies
Hirose U.FL to SMA Jack PCB Mount - Cable Type
Hirose Part Number: U.FL-LP-068
SMA part number: C02BI31113015B
Length: 25-400mm
Cable Diameter: 0.81mm, 1.13mm, 1.32mm, 1.37mm cables
See PDF drawing for details
Working Frequency Range: DC to 6GHz
Lead time: 4 weeks
Hirose UFL to SMA straight Bulkhead Jack (Female with threaded nut)
Hirose Part Number: U.FL-LP-068
Length: 50-400mm
Cable Diameter: 1.13mm ø grey cable
Working Frequency Range: DC to 3GHz
Lead time: 4 weeks
Ipex economical alternative: CABLE 036 RF
Hirose UFL to FME straight Bulkhead Plug (Male with threaded nut)
Hirose Part Number: U.FL-LP-068
Length: 50-400mm
Cable Diameter: 1.13mm ø grey cable
Working Frequency Range: DC to 3GHz
Lead time: 4 weeks
Ipex economical alternative: CABLE 041 RF or CABLE 043 RF
Hirose UFL to SMA straight Bulkhead Jack (Female with threaded nut)
Hirose Part Number: U.FL-LP(V)-040
Length: 50-500mm
Cable Diameter: 0.81mm ø grey cable
Working Frequency Range: DC to 3GHz
Lead time: 5 weeks
Ipex economical alternative: CABLE 069 RF
Hirose UFL to Hirose UFL
Hirose Part Number: U.FL-LP-068
Length: 50-400mm
Cable Diameter: 0.81mm, 1.13mm, 1.32mm, 1.37mm cables
See PDF drawing for details
Working Frequency Range: DC to 6GHz
Lead time: 4 weeks
Ipex economical alternative: CABLE 052 RF
Hirose U.FL to stripped end OR tinned centre conductor and copper wire soldered to braid/shield allows solder to PCB
Hirose Part Number: U.FL-LP-068
Length: 25-400mm
Cable Diameter: 1.13mm ø black cable
Working Frequency Range: Information not available, contact GradConn to discuss
Lead time: 4 weeks
Ipex economical alternative: CABLE 084 RF
Information on stripped and tinned cable
Hirose U.FL to RP SMA (reverse polarity) straight Bulkhead Jack (with threaded nut) with O-ring
Hirose Part Number: U.FL-LP-068
SMA part number: C20AD31113005B
Length: 25-400mm
Cable Diameter: 0.81mm, 1.32mm, 1.37mm cables
See PDF drawing for details
Working Frequency Range: DC to 6GHz
Lead time: 4 weeks
Ipex economical alternative: CABLE 090 RF
Hirose UFL to RP SMA (reverse polarity) straight Bulkhead Jack
Hirose Part Number: U.FL-LP-068
SMA part number: C20ABWS178003B
Length: 25-400mm
Cable Diameter: 1.13mm ø black cable
Working Frequency Range: DC to 3GHz
Lead time: 5 weeks
Ipex economical alternative: CABLE 080 RF
