RF Cable Assembly (I-PEX, Hirose U.FL, Murata)
Stripped cable, twisted braid & tinned & Stripped cable
See individual cable drawings for details.
- GradConn have capability to provide:
- Stripped cable. (For termination to a connector later.)
- Stripped cable with tinned centre conductor and twisted and tinned braid. (For solder termination to a PCB.)
- Cable length: Minimum 40mm.>
- Centre Conduction:
- Tin dimension: Standard fully tinned.
- Tinned Braid/Shield:
- Tin dimension: Standard fully tinned.
- Cable diameter:
- Recommended 1.32mm or RG178. 1.13mm is also possible.
- Cable thinner than 1.13mm is not recommended as braiding is thin and after tinning can become brittle.
- Recommended: 1.32mm or RG178 cable.
- Tolerance of soldered copper wire soldered to braid:
- For standard 10mm +/-1mm.
- Special designs for: Tolerance, braid orientation and tin dimensions are available. Let us know your requirements.
- Testing:
- Not available, as not possible to connected to Network Analyzer.
Stripped cable, twisted braid & tinned & Stripped cable
CABLE 101 RF
RF Cable Assembly
SMA Straight bulkhead jack to stripped end OR tinned centre conductor and copper wire soldered to braid/shield allows solder to PCB
Length: 50mm upwards
Cable Diameter: RG174 black cable
Working Frequency Range: Information not available, contact GradConn to discuss
Lead time: 3 weeks
Information on stripped and tinned cable
SMA Straight bulkhead jack to stripped end OR tinned centre conductor and copper wire soldered to braid/shield allows solder to PCB
Length: 50mm upwards
Cable Diameter: RG174 black cable
Working Frequency Range: Information not available, contact GradConn to discuss
Lead time: 3 weeks
Information on stripped and tinned cable
CABLE 108 RF
RF Cable Assembly
SMB straight plug to stripped end OR tinned centre conductor and copper wire soldered to braid/shield allows solder to PCB
SMA part number: C03AA3F174003
Length: 25mm upwards
Cable Diameter: RG174 black cable
Working Frequency Range: Information not available, contact GradConn to discuss
Lead time: 5 weeks
Information on stripped and tinned cable
SMB straight plug to stripped end OR tinned centre conductor and copper wire soldered to braid/shield allows solder to PCB
SMA part number: C03AA3F174003
Length: 25mm upwards
Cable Diameter: RG174 black cable
Working Frequency Range: Information not available, contact GradConn to discuss
Lead time: 5 weeks
Information on stripped and tinned cable
CABLE 064 RF
RF Cable Assembly
IPEX MHF to stripped end OR tinned centre conductor and copper wire soldered to braid/shield allows solder to PCB
IPEX part number: 20278-112R-32 Gold plated
Alternative to Hirose U.FL
Length: 50-400mm
Cable Diameter: 1.32mm ø grey cable
Working Frequency Range: Information not available, contact GradConn to discuss
Lead time: 3 weeks
Test Report I Pex MHF compatibility with Hirose U.FL Information on stripped and tinned cable
IPEX MHF to stripped end OR tinned centre conductor and copper wire soldered to braid/shield allows solder to PCB
IPEX part number: 20278-112R-32 Gold plated
Alternative to Hirose U.FL
Length: 50-400mm
Cable Diameter: 1.32mm ø grey cable
Working Frequency Range: Information not available, contact GradConn to discuss
Lead time: 3 weeks
Test Report I Pex MHF compatibility with Hirose U.FL Information on stripped and tinned cable
CABLE 065 RF
RF Cable Assembly
SMA Straight bulkhead jack to stripped end OR tinned centre conductor and copper wire soldered to braid/shield allows solder to PCB
Length: 50mm upwards
Cable Diameter: 1.32mm ø single shield grey cable
Working Frequency Range: Information not available, contact GradConn to discuss
Lead time: 3 weeks
Information on stripped and tinned cable
SMA Straight bulkhead jack to stripped end OR tinned centre conductor and copper wire soldered to braid/shield allows solder to PCB
Length: 50mm upwards
Cable Diameter: 1.32mm ø single shield grey cable
Working Frequency Range: Information not available, contact GradConn to discuss
Lead time: 3 weeks
Information on stripped and tinned cable
CABLE 066 RF
RF Cable Assembly
FME straight bulkhead plug to stripped end OR tinned centre conductor and copper wire soldered to braid/shield allows solder to PCB
Length: 50mm upwards
Cable Diameter: 1.32mm ø single shield grey cable
Working Frequency Range: Information not available, contact GradConn to discuss
Lead time: 3 weeks
Information on stripped and tinned cable
FME straight bulkhead plug to stripped end OR tinned centre conductor and copper wire soldered to braid/shield allows solder to PCB
Length: 50mm upwards
Cable Diameter: 1.32mm ø single shield grey cable
Working Frequency Range: Information not available, contact GradConn to discuss
Lead time: 3 weeks
Information on stripped and tinned cable
CABLE 055 RF
RF Cable Assembly
RP SMA (reverse polarity) straight Bulkhead Jack (with threaded nut) to stripped end OR tinned centre conductor and copper wire soldered to braid/shield allows solder to PCB
SMA part number: C20ABWS178003B
Length: 50-400mm
Cable Diameter: RG178 brown cable
Working Frequency Range: Information not available, contact GradConn to discuss
Lead time: 3 weeks
Information on stripped and tinned cable
RP SMA (reverse polarity) straight Bulkhead Jack (with threaded nut) to stripped end OR tinned centre conductor and copper wire soldered to braid/shield allows solder to PCB
SMA part number: C20ABWS178003B
Length: 50-400mm
Cable Diameter: RG178 brown cable
Working Frequency Range: Information not available, contact GradConn to discuss
Lead time: 3 weeks
Information on stripped and tinned cable
CABLE 107 RF
RF Cable Assembly
SMA right angle bulkhead jack to stripped end OR tinned centre conductor and copper wire soldered to braid/shield allows solder to PCB
SMA part number: C02BS31132017
Length: 25-400mm
Cable Diameter: 1.32mm ø grey cable
Working Frequency Range: Information not available, contact GradConn to discuss
Lead time: 3 weeks
Information on stripped and tinned cable
SMA right angle bulkhead jack to stripped end OR tinned centre conductor and copper wire soldered to braid/shield allows solder to PCB
SMA part number: C02BS31132017
Length: 25-400mm
Cable Diameter: 1.32mm ø grey cable
Working Frequency Range: Information not available, contact GradConn to discuss
Lead time: 3 weeks
Information on stripped and tinned cable
CABLE 083 RF
RF Cable Assembly
Hirose U.FL to stripped end OR tinned centre conductor and copper wire soldered to braid/shield allows solder to PCB
Hirose Part Number: U.FL-LP-068
Length: 25-400mm
Cable Diameter: 1.13mm ø black cable
Working Frequency Range: Information not available, contact GradConn to discuss
Lead time: 4 weeks
Hirose U.FL to stripped end OR tinned centre conductor and copper wire soldered to braid/shield allows solder to PCB
Hirose Part Number: U.FL-LP-068
Length: 25-400mm
Cable Diameter: 1.13mm ø black cable
Working Frequency Range: Information not available, contact GradConn to discuss
Lead time: 4 weeks
Ipex economical alternative: CABLE 084 RF
Information on stripped and tinned cable
CABLE 084 RF
RF Cable Assembly
IPEX MHF to stripped end OR tinned centre conductor and copper wire soldered to braid/shield allows solder to PCB
IPEX part number: 20278-112R-13 Gold plated
Alternative to Hirose U.FL
Length: 25-400mm
Cable Diameter: 1.13mm ø black cable
Working Frequency Range: Information not available, contact GradConn to discuss
Lead time: 3 weeks
Test Report I Pex MHF compatibility with Hirose U.FL Information on stripped and tinned cable
IPEX MHF to stripped end OR tinned centre conductor and copper wire soldered to braid/shield allows solder to PCB
IPEX part number: 20278-112R-13 Gold plated
Alternative to Hirose U.FL
Length: 25-400mm
Cable Diameter: 1.13mm ø black cable
Working Frequency Range: Information not available, contact GradConn to discuss
Lead time: 3 weeks
Test Report I Pex MHF compatibility with Hirose U.FL Information on stripped and tinned cable
CABLE 086 RF
RF Cable Assembly
SMA Jack PCB Mount − cable type to stripped end OR tinned centre conductor and copper wire soldered to braid/shield allows solder to PCB
SMA part number: C02BI31332015B
Length: 25-400mm
Cable Diameter: 1.32mm ø grey cable
Working Frequency Range: Information not available, contact GradConn to discuss
Lead time: 3 weeks
Information on stripped and tinned cable
SMA Jack PCB Mount − cable type to stripped end OR tinned centre conductor and copper wire soldered to braid/shield allows solder to PCB
SMA part number: C02BI31332015B
Length: 25-400mm
Cable Diameter: 1.32mm ø grey cable
Working Frequency Range: Information not available, contact GradConn to discuss
Lead time: 3 weeks
Information on stripped and tinned cable
CABLE 121 RF
RF Cable Assembly
Murata GSC to stripped end OR tinned centre conductor and copper wire soldered to braid/shield allows solder to PCB
Murata Part number: GSC MXTK92
Length: 25-400mm
Cable Diameter: 0.81mm ø grey cable
Working Frequency Range: Information not available, contact GradConn to discuss
Lead time: 5 weeks
Murata GSC to stripped end OR tinned centre conductor and copper wire soldered to braid/shield allows solder to PCB
Murata Part number: GSC MXTK92
Length: 25-400mm
Cable Diameter: 0.81mm ø grey cable
Working Frequency Range: Information not available, contact GradConn to discuss
Lead time: 5 weeks
CABLE 123 RF
RF Cable Assembly
Hirose H.FL to stripped end OR tinned centre conductor and copper wire soldered to braid/shield allows solder to PCB
Hirose Part Number: H.FL-LP
Length: 25-400mm
Cable Diameter: 1.32mm ø black cable
Working Frequency Range: Information not available, contact GradConn to discuss
Lead time: 5 weeks
Information on stripped and tinned cable
Hirose H.FL to stripped end OR tinned centre conductor and copper wire soldered to braid/shield allows solder to PCB
Hirose Part Number: H.FL-LP
Length: 25-400mm
Cable Diameter: 1.32mm ø black cable
Working Frequency Range: Information not available, contact GradConn to discuss
Lead time: 5 weeks
Information on stripped and tinned cable
CABLE 125 RF
RF Cable Assembly
SMA straight jack to stripped end OR tinned centre conductor and copper wire soldered to braid/shield allows solder to PCB
SMA part number: C02ABWS178003B
Length: 50-2000mm
Cable Diameter: RG178 brown cable
Working Frequency Range: Information not available, contact GradConn to discuss
Lead time: 5 weeks
SMA straight jack to stripped end OR tinned centre conductor and copper wire soldered to braid/shield allows solder to PCB
SMA part number: C02ABWS178003B
Length: 50-2000mm
Cable Diameter: RG178 brown cable
Working Frequency Range: Information not available, contact GradConn to discuss
Lead time: 5 weeks
