I-PEX MHF RF Cable Assemblies
About I-PEX MHF series
GradConn offer a selection of cable assemblies including I-Pex connector. The most popular choices are for the opposite end of the Ipex cable are SMA female, RP SMA and FME male bulkhead connectors; This allows customers to mount the SMA, RP SMA or FME interface connectors to a bulkhead with a cut out and plug in an antenna or further extension cable on the other side of the bulkhead.
The RP SMA is normally used in Wi-Fi applications.
The MHF connector range is an intermatable alternative to Hirose U.FL. View the report showing the intermatability between Hirose U FL and I-Pex MHF connectors.
IPex have been established in Japan since 1994. As an alternative to Hirose UFL GradConn offer the IPEX MHF range. The ipex connector is a high quality and economical Japanese manufactured connector which is intermatable with Hirose U.FL; This means that a customer can plug an I-PEX MHF cable assembly into a Hirose PCB connector. Customers should test samples to approve the use of I-Pex cables, however GradConn have many satisfied customers after swapping from Hirose.
GradConn have a clear focus on I-Pex with I-Pex original Japanese tooling and automatic cut and strip machines. Auto-stripping machines provide stable and high efficient productivity and a strict production process are used to increase the stability of quality control.
Agilent's Vector Networking Analyzer also can guarantee finished products meet customer's performance requests.
Find out more about I-Pex here: http://www.i-pex.com/
View MHF products: http://www.i-pex.com/
For further information about GradConn’s I-PEX MHF cross reference, please contact GradConn
Specifications are subject to change without notice. Please consult the manufacturer for the most up to data information.
IPEX MHF Connectors and Cable Assemblies
IPEX MHF to SMA Jack PCB Mount - Cable Type
IPEX part number: 20278-112R or 20351-112R series, dependent on cable diameter chosen
SMA part number: C02BI311 series, dependent on cable diameter chosen
Length: 25-400mm
Cable Diameter: 0.81mm, 1.13mm, 1.32mm, 1.37mm, RG178 cables
See PDF drawing for details
Working Frequency Range: DC to 6GHz
Lead time: 3 weeks
Test Report I Pex MHF compatibility with Hirose U.FL
IPEX MHF to RP SMA Jack PCB Mount (Male)
IPEX part number: 20278-112R-13, 20278-112R-08, 20278-112R-32, 20278-112R-37
SMA part number: C20B131113015B, C20B131108015B, C20B131132015B, C20B131137015B, C20B131178015B
Alternative to Hirose U.FL
Length: 25-400mm
Cable Diameter: 0.81mm, 1.13mm, 1.32mm, 1.37mm, RG178 cables
See PDF drawing for details
Working Frequency Range: DC to 6GHz
Lead time: 3 weeks
Test Report I Pex MHF compatibility with Hirose U.FL
IPEX MHF to SMA straight Bulkhead Jack (Female with threaded nut)
IPEX part number: 20278-112R-13, 20351-112R-37
SMA part number: C02ABWS178003B
Alternative to Hirose U.FL
Length: 50-400mm
Cable Diameter: 1.13mm, 1.37mm, RG178 cables
See PDF drawing for details
Working Frequency Range: DC to 3GHz
Lead time: 2 weeks
Test Report I Pex MHF compatibility with Hirose U.FL
IPEX MHF to FME straight Bulkhead Plug (Male with threaded nut)
IPEX part number: 20278-112R-13 Gold plated
Alternative to Hirose U.FL
Length: 50-400mm
Cable Diameter: 1.13mm ø grey cable
Working Frequency Range: DC to 3GHz
Lead time: 2 weeks
Test Report I Pex MHF compatibility with Hirose U.FL
IPEX MHF to FME straight Bulkhead Plug (Male with threaded nut)
IPEX part number: 20278-112R-37 Gold plated
Alternative to Hirose U.FL
Length: 50-400mm
Cable Diameter: 1.37mm ø grey cable
Working Frequency Range: DC to 3GHz
Lead time: 2 weeks
Test Report I Pex MHF compatibility with Hirose U.FL
IPEX MHF to RP SMA (reverse polarity) straight Bulkhead Jack (with threaded nut)
IPEX part number: 20278-112R-13 Gold plated
Alternative to Hirose U.FL
Length: 50-400mm
Cable Diameter: 1.13mm, RG178 cables
See PDF drawing for details
Working Frequency Range: DC to 3GHz
Lead time: 2 weeks
Test Report I Pex MHF compatibility with Hirose U.FL
IPEX MHF to IPEX MHF
IPEX part number: 20278-112R, 20311-112R or 20351-112R series, dependent on cable diameter chosen
Alternative to Hirose U.FL
Length: 50-400mm
Cable Diameter: 0.81mm, 1.13mm, 1.32mm, 1.37mm, RG178, 0.047" cables
See PDF drawing for details
Working Frequency Range: DC to 6GHz
Lead time: 2 weeks
Test Report I Pex MHF compatibility with Hirose U.FL
IPEX MHF to SMA straight Bulkhead Jack with O-ring (Female with threaded nut)
IPEX part number: 20278-112R-13 Gold plated
Alternative to Hirose U.FL
Length: 50-400mm
Cable Diameter: 1.13mm ø grey cable
Working Frequency Range: DC to 6GHz
Lead time: 3 weeks
Test Report I Pex MHF compatibility with Hirose U.FL
IPEX MHF to stripped end OR tinned centre conductor and copper wire soldered to braid/shield allows solder to PCB
IPEX part number: 20278-112R-32 Gold plated
Alternative to Hirose U.FL
Length: 50-400mm
Cable Diameter: 1.32mm ø grey cable
Working Frequency Range: Information not available, contact GradConn to discuss
Lead time: 3 weeks
Test Report I Pex MHF compatibility with Hirose U.FL Information on stripped and tinned cable
IPEX MHF to RP TNC (reverse polarity with male contact) straight Bulkhead Jack (with threaded nut) and o-ring
IPEX part number: 20278-112R-37 Gold plated
Alternative to Hirose U.FL
Length: 50-400mm
Cable Diameter: 1.13mm, 1.32mm, 1.37mm, 1.48mm, RG178 cables
See PDF drawing for details
Working Frequency Range: DC to 3GHz
Lead time: 5 weeks
Test Report I Pex MHF compatibility with Hirose U.FL
IPEX MHF to RP TNC (reverse polarity with male contact) straight Bulkhead Jack (with threaded nut) and o-ring
IPEX part number: 20278-112R-37 Gold plated
Alternative to Hirose U.FL
Length: 50-400mm
Cable Diameter: RG178 brown cable
Working Frequency Range: DC to 3GHz
Lead time: 5 weeks
Test Report I Pex MHF compatibility with Hirose U.FL
IPEX MHF to SMA straight plug (Male)
IPEX part number: 20351-112R-37 Gold plated
Alternative to Hirose U.FL
Length: 50mm upwards
Cable Diameter: RG178 brown cable
Working Frequency Range: DC to 6GHz
Lead time: 2 weeks
Test Report I Pex MHF compatibility with Hirose U.FL
IPEX MHF to SMA straight Bulkhead Jack (Female with threaded nut)
IPEX part number: 20278-112R-13 Gold plated
SMA part number: C02AB31113003
Alternative to Hirose U.FL
Length: 50-400mm
Cable Diameter: 1.13mm ø grey cable
Working Frequency Range: DC to 6GHz
Lead time: 2 weeks
Test Report I Pex MHF compatibility with Hirose U.FL
IPEX MHF to RP SMA (reverse polarity) straight Bulkhead Jack (with threaded nut)
IPEX part number: 20351-112R-37 Gold plated
Alternative to Hirose U.FL
Length: 50-400mm
Cable Diameter: 1.37mm ø white cable
Working Frequency Range: DC to 3GHz
Lead time: 2 weeks
Test Report I Pex MHF compatibility with Hirose U.FL
IPEX MHF to RP SMA (reverse polarity) straight Bulkhead Jack (with threaded nut)
IPEX part number: 20351-112R-37 Gold plated
SMA part number: C20AB31137003I
Alternative to Hirose U.FL
Length: 50-400mm
Cable Diameter: 1.37mm ø white cable
Working Frequency Range: DC to 6GHz
Lead time: 3 weeks
Test Report I Pex MHF compatibility with Hirose U.FL
IPEX MHF to stripped end OR tinned centre conductor and copper wire soldered to braid/shield allows solder to PCB
IPEX part number: 20278-112R-13 Gold plated
Alternative to Hirose U.FL
Length: 25-400mm
Cable Diameter: 1.13mm ø black cable
Working Frequency Range: Information not available, contact GradConn to discuss
Lead time: 3 weeks
Test Report I Pex MHF compatibility with Hirose U.FL Information on stripped and tinned cable
IPEX MHF to RP SMA (reverse polarity) straight Bulkhead Jack (with threaded nut) with O-ring
IPEX part number: 20351-112R-13 Gold plated
SMA part number: C20AD31113005B
Alternative to Hirose U.FL
Length: 25-400mm
Cable Diameter: 1.32mm, 1.37mm, 1.48mm, RG178 cables
See PDF drawing for details
Working Frequency Range: DC to 6GHz
Lead time: 3 weeks
Test Report I Pex MHF compatibility with Hirose U.FL
IPEX MHF to MMCX right angle Male
IPEX part number: 20278-112R-13, 20351-112R-37
Alternative to Hirose U.FL
Length: 25-400mm
Cable Diameter: 1.13mm, RG178 cables
See PDF drawing for details
Working Frequency Range: DC to 6GHz
Lead time: 5 weeks
Test Report I Pex MHF compatibility with Hirose U.FL
