2.00mm (0.079") PCB Connectors

Custom PCB
Connectors
Co-Planar Mating
Guide
Parallel Stacking
Calculator
Board to Board
Cross Reference

Pin headers and female socket connectors in 2 to 50 contacts single in line and 4 to 100 contacts dual in line, 8 to 120 contacts triple & quad in line. Capable of 2.0A per circuit with a dielectric withstanding voltage of 500V AC and operating temperature range of -40°C to 105°C. Mated board to board connector pairs offer 100 insertion cycles durability.

Available in single, dual row, triple and quad row in through hole (TH) and surface mount (SMT). Headers and sockets available in both vertical and horizontal orientation. Pin spacing is 2.00mm (.079") between pins and rows.

Pin headers are available in SMT or thru hole with vertical and horizontal orientation. Pin headers allow a customisable pin length with a square pin size 0.50mm (.019"). Elevated PCB headers offer parallel PCB stacking solutions up to 38mm (1.496") between boards.

U shaped pin headers are available, suitable for co-planar PCB applications, either to soldering direct or plug to two vertical sockets.

PCB sockets are available in SMT or thru hole in vertical and horizontal orientations.

SMT receptacles offer dual entry PCB mating options: Pin headers are mated with receptacles from above to achieve standard parallel PCB mating. In bottom entry mode holes are drilled in the PCB and the header pins enter the socket from below via the underside of the PCB.
Bottom entry offers alternative design solutions, for example achieving a very low parallel PCB stacking height by mounting the socket on top of the PCB, the stack height is the header insulator, as low as 1.00mm (.039”). Alternatively bottom entry allows connection of three PCB’s using a pass thru technique, where a long header pin mates with two PCB sockets, passing all the way through the middle socket.

A range of shrouded headers with keyed cutouts and sockets with bumps offer polarisation which ensures connectors may only be plugged together in the correct orientation. Available in vertical and horizontal orientation Shrouded parts also provide protection from shorting, especially on the shrouded elevated pin header, where pins are normally exposed. For parallel PCB stacking there is a stacking elevated shrouded header.

Options for perfect co-planar PCB connection in thru hole, SMT in single and dual row. See the planar mating guide for more information.

Tube or Tape and reel packaging (with or without film or caps) for pick and place assembly, is available on all surface mount 2.00mm connectors.

All GradConn board to board connectors are RoHS compliant and suitable for high temperature processing, see downloadable drawings and product specification for more details.

Filter Options (Showing 46 products)

2.00mm Single Row, Through hole Header (Male) - BB02-1F
Active
2.00mm pin header
2 to 40 contacts
Male Single Row through hole connector
U shaped
Profile: 2.00mm
Without locating peg
Custom pin length
Perfect for 'one piece' planar mating
BB02-1F
2.00mm Dual Row, Through hole Header (Male) - BB02-2F
Active
2.00mm pin header
2 to 80 contacts
Male Dual Row through hole connector
U shaped
Profile: 4.00mm
Without locating peg
Custom pin length
Perfect for 'one piece' planar mating
BB02-2F
2.00mm Dual Row, Through hole Header (Male) - BB02-4F
Active
2.00mm pin header
4 to 60 contacts
Male Dual Row through hole connector
Straight
Without locating peg
Packed loose in box
1.5mm or 2.0mm
Custom pin lengths
Through hole part compatible for surface mount process
Insulator standoffs allow solder paste to sit beneath
BB02-4F
2.00mm Dual Row, Through hole Header (Male) - BB02-FA
Active
2.00mm pin header
6 to 60 contacts
Male Dual Row through hole connector
Straight
Profile: 1.00mm
Without locating peg
Custom pin lengths
BB02-FA
2.00mm Single Row, Through hole Header (Male) - BB02-FB
Active
2.00mm pin header
2 to 40 contacts
Male Single Row through hole connector
Straight or right angle
Profile: 1.50mm or 2.00mm options for straight type, 2.00mm for right angle type
Without locating peg
Custom pin lengths
Contact height above PCB: 1.00mm (right angle version)
Perfect for planar mating with BB02-RK
Best Price!
BB02-FB
2.00mm Dual Row, Through hole Header (Male) - BB02-FD
Active
2.00mm pin header
4 to 80 contacts
Male Dual Row through hole connector
Straight or right angle
Profile: 1.50mm or 2.00mm options for straight type, 4.00mm for right angle type
Without locating peg
Custom pin lengths
Contact height above PCB (lower pins): 1.00mm (right angle version)
Best Price!
BB02-FD
2.00mm Dual Row, Surface mount Header (Male) - BB02-FE
Active
2.00mm pin header
4 to 80 contacts
Male Dual Row surface mount connector
Straight
Optional locating peg
Available in tape and reel packaging
Custom pin lengths
Best Price!
BB02-FE
2.00mm Dual Row, Through hole Header (Male) - BB02-FG
Active
2.00mm pin header
4 to 80 contacts
Male Dual Row through hole connector
Straight or right angle
Profile: 4.00mm for straight type, 4.30mm for right angle type
Without locating peg
Contact height above PCB (lower pins): 1.30mm (right angle version)
BB02-FG
2.00mm Single Row, Surface mount Header (Male) - BB02-FK-A
Active
2.00mm pin header
2 to 40 contacts
Male Single Row surface mount connector
Right angle
Profile: 2.00mm
Without locating peg
Contact height above PCB: 1.00mm
Perfect for planar mating with BB02-RW
BB02-FK-A
2.00mm Single Row, Surface mount Header (Male) - BB02-FL
Active
2.00mm pin header
2 to 40 contacts
Male Single Row surface mount connector
Straight
Without locating peg
2.00mm high insulator
Custom pin lengths
BB02-FL
2.00mm Quad Row, Through hole Header (Male) - BB02-FM
Active
2.00mm pin header
24 to 120 contacts
Male Quad Row through hole connector
Straight or right angle
Profile: 1.50mm for straight type, 8.00mm for right angle type
Without locating peg
Custom pin lengths
Contact height above PCB (lower pins): 1.00mm (right angle version)
BB02-FM
2.00mm Dual Row, Through hole Header (Male) - BB02-FP
Active
2.00mm box type pin header
6 to 68 contacts
Male Dual Row through hole connector
Straight
Stacking Profile: 1.70mm
Without locating peg
Shrouded
BB02-FP
2.00mm Dual Row, Through hole Header (Male) - BB02-FQ
Active
2.00mm box type pin header
6 to 68 contacts
Male Dual Row through hole connector
Right angle
Profile: 5.60mm
Without locating peg
Contact height above PCB (lower pins): 1.75mm
Shrouded
BB02-FQ
2.00mm Dual Row, Through hole Header (Male) - BB02-FS
Active
2.00mm elevated box type pin header
6 to 50 contacts
Male Dual Row through hole connector
Straight
Stacking Profile: 3.70mm - 27.70mm
Without locating peg
Custom pin lengths
Shrouded
BB02-FS
2.00mm Dual Row, Surface mount Header (Male) - BB02-FU
Active
2.00mm elevated pin header
6 to 80 contacts
Male Dual Row surface mount connector
Straight
Stacking Profile: 4.80mm - 36.00mm
Optional locating peg
Available in tape and reel packaging
Custom pin lengths
BB02-FU
2.00mm Dual Row, Surface mount Header (Male) - BB02-FW
Active
2.00mm elevated box type pin header
6 to 50 contacts
Male Dual Row surface mount connector
Straight
Stacking Profile: 4.30mm - 21.80mm
Optional locating peg
Custom pin lengths offered as standard
Shrouded
BB02-FW
2.00mm Dual Row, Surface mount Header (Male) - BB02-FY
Active
2.00mm box type pin header
8 to 50 contacts
Male Dual Row surface mount connector
Straight
Stacking Profile: 2.1mm (w/o peg), 2.3mm (w peg)
Optional locating peg
Available in tape and reel packaging
Custom pin lengths
Shrouded
BB02-FY
2.00mm Dual Row, Through hole Header (Male) - BB02-FZ
Active
2.00mm elevated pin header
4 to 80 contacts
Male Dual Row through hole connector
Right angle
Profile: 4.00mm
Without locating peg
Custom pin lengths
Contact height above PCB (lower pins): 1.00mm
BB02-FZ
2.00mm Quad Row, Through hole Socket (Female) - BB02-GA
Active
2.00mm female header (socket)
8 to 120 contacts
Female Quad Row through hole connector
Straight
Profile: 6.30mm
Without locating peg
BB02-GA
2.00mm Single Row, Through hole Socket (Female) - BB02-GD
Active
2.00mm female header (socket)
2 to 40 contacts
Female Single Row through hole connector
Straight or right angle
Profile: 4.30mm for straight type, 2.80mm for right angle type
Without locating peg
Contact height above PCB: 1.60mm (right angle version)
Best Price!
BB02-GD
2.00mm Dual Row, Through hole Socket (Female) - BB02-GH
Active
2.00mm female header (socket)
4 to 80 contacts
Female Dual Row through hole connector
Straight
Profile: 4.00mm or 4.30mm
Without locating peg
Choice of pin length
Best Price!
BB02-GH
2.00mm Dual Row, Through hole Socket (Female) - BB02-GK
Active
2.00mm female header (socket)
4 to 50 contacts
Female Dual Row through hole connector
Right angle
Profile: 5.00mm
Side entry
Without locating peg
Contact height above PCB (lower pins): 1.90mm
BB02-GK
2.00mm Dual Row, Through hole Socket (Female) - BB02-GL
Active
2.00mm female header (socket)
6 to 80 contacts
Female Dual Row through hole connector
Right angle
Profile: 4.85mm
Side entry
Without locating peg
Contact height above PCB (lower pins): 1.50mm
Best Price!
BB02-GL
2.00mm Dual Row, Through hole Socket (Female) - BB02-GM
Active
2.00mm female header (socket)
6 to 80 contacts
Female Dual Row through hole connector
Straight
Profile: 4.30mm
Dual entry type - also suitable for bottom entry applications
Without locating peg
Pitch: 5.00mm or 6.00mm
BB02-GM
2.00mm Dual Row, Through hole Socket (Female) - BB02-GP-A
Active
2.00mm elevated female header (socket)
4 to 80 contacts
Female Dual Row through hole connector
Straight
Profile: 7.10mm - 1.50mm spacer
Without locating peg
Choice of elevation height
BB02-GP-A
2.00mm Dual Row, Surface mount Socket (Female) - BB02-GQ
Active
2.00mm female header (socket)
6 to 80 contacts
Female Dual Row surface mount connector
Straight
Profile: 4.30mm or 4.60mm
Dual entry (top and bottom entry)
Optional locating peg
Available in tape and reel packaging
Best Price!
BB02-GQ
2.00mm Single Row, Surface mount Socket (Female) - BB02-GS
Active
2.00mm female header (socket)
2 to 40 contacts
Female Single Row surface mount connector
Straight
Profile: 4.50mm
Dual entry (top and bottom entry)
Without locating peg
Available in tape and reel packaging
Choice of footprint
Best Price!
BB02-GS
2.00mm Quad Row, Through hole Socket (Female) - BB02-GW
Active
2.00mm elevated female header (socket)
16 to 120 contacts
Female Quad Row through hole connector
Straight
Profile: 9.35mm
Without locating peg
Custom heights available
BB02-GW
2.00mm Dual Row, Surface mount Socket (Female) - BB02-GY
Active
2.00mm female header (socket)
4 to 50 contacts
Female Dual Row surface mount connector
Right angle
Profile: 4.00mm
Side entry
Without locating peg
Contact height above PCB (lower pins): 1.00mm
BB02-GY
2.00mm Dual Row, Surface mount Socket (Female) - BB02-GZ
Active
2.00mm female header (socket)
6 to 70 contacts
Female Dual Row surface mount connector
Straight
Profile: 2.80mm
Dual entry (top and bottom entry)
Optional locating peg
Available in tape and reel packaging
BB02-GZ
2.00mm Single Row, Shunt Socket (Female) - BB02-RD
Active
2.00mm mini jumper (shunt)
2 contacts
Female Single Row shunt connector
Straight
Without locating peg
3.48mm high insulator
Open type
BB02-RD
2.00mm Single Row, Shunt Socket (Female) - BB02-RE
Active
2.00mm mini jumper (shunt)
2 contacts
Female Single Row shunt connector
Straight
Without locating peg
4.95mm high insulator
Closed type
BB02-RE
2.00mm Dual Row, Surface mount Socket (Female) - BB02-RG
Active
2.00mm female header (socket)
4 to 80 contacts
Female Dual Row surface mount connector
Straight
Profile: 2.20mm
Dual entry (top and bottom entry)
With locating peg
Available in tape and reel packaging
BB02-RG
2.00mm Dual Row, Surface mount Header (Male) - BB02-RH
Active
2.00mm pin header
4 to 80 contacts
Male Dual Row surface mount connector
Right angle
Profile: 4.00mm
Optional locating peg
Custom pin lengths
Contact height above PCB (lower pins): 1.00mm
Perfect for planar mating with BB02-RX
BB02-RH
2.00mm Dual Row, Surface mount Socket (Female) - BB02-RJ
Active
2.00mm female header (socket)
4 to 80 contacts
Female Dual Row surface mount connector
Straight
Top entry
Optional locating peg
Available in tape and reel packaging
6.35mm high insulator
BB02-RJ
2.00mm Single Row, Through hole Socket (Female) - BB02-RK
Active
2.00mm female header (socket)
2 to 40 contacts
Female Single Row through hole connector
Straight or right angle
Profile: 6.35mm for straight type, 2.00mm for right angle type
Without locating peg
Available in tube
Contact height above PCB: 1.00mm (right angle version)
Perfect for planar mating with BB02-FB
BB02-RK
2.00mm Dual Row, Through hole Socket (Female) - BB02-RL
Active
2.00mm female header (socket)
4 to 80 contacts
Female Dual Row through hole connector
Straight or right angle
Profile: 6.35mm for straight type, 4.00mm for right angle type
Without locating peg
Contact height above PCB (lower pins): 1.00mm (right angle version)
BB02-RL
2.00mm Single Row, Through hole Header (Male) - BB02-RM
Active
2.00mm elevated pin header
2 to 40 contacts
Male Single Row through hole connector
Straight
Stacking Profile: 3.00mm - 38.20mm
Without locating peg
Custom pin lengths
BB02-RM
2.00mm Dual Row, Through hole Header (Male) - BB02-RN
Active
2.00mm elevated pin header
4 to 80 contacts
Male Dual Row through hole connector
Straight
Stacking Profile: 4.00mm - 38.20mm
Without locating peg
Custom pin lengths
BB02-RN
2.00mm Dual Row, Through hole Socket (Female) - BB02-RP
Active
2.00mm female header (socket)
6 to 80 contacts
Female Dual Row through hole connector
Straight
Profile: 4.00mm
Without locating peg
With polarising tab
BB02-RP
2.00mm Triple Row, Through hole Socket (Female) - BB02-RQ
Active
2.00mm female header (socket)
9 to 120 contacts
Female Triple Row through hole connector
Straight or right angle
Profile: 6.35mm for straight type, 6.00mm for right angle type
Without locating peg
Contact height above PCB (lower pins): 1.00mm (right angle version)
Perfect for planar mating with BB02-RR
BB02-RQ
2.00mm Triple Row, Through hole Header (Male) - BB02-RR
Active
2.00mm pin header
9 to 120 contacts
Male Triple Row through hole connector
Straight or right angle
Profile: 2.00mm for straight type, 6.00mm for right angle type
Without locating peg
Custom pin lengths
Contact height above PCB (lower pins): 1.00mm (right angle version)
Perfect for planar mating with BB02-RQ
BB02-RR
2.00mm Single Row, Surface mount Socket (Female) - BB02-RS
Active
2.00mm female header (socket)
2 to 40 contacts
Female Single Row surface mount connector
Straight
Profile: 2.20mm
Top entry
Optional locating peg
Available in tape and reel packaging
Choice of footprint
BB02-RS
2.00mm Single Row, Surface mount Header (Male) - BB02-RT
Active
2.00mm elevated pin header
2 to 40 contacts
Male Single Row surface mount connector
Straight
Stacking Profile: 4.30mm - 36.00mm
Without locating peg
Custom pin lengths
BB02-RT
2.00mm Single Row, Surface mount Socket (Female) - BB02-RW
Active
2.00mm female header (socket)
2 to 40 contacts
Female Single Row surface mount connector
Right angle
Profile: 2.00mm
Side entry
Without locating peg
Available in tube or tape and reel
Contact height above PCB: 1.00mm
Perfect for planar mating with BB02-FK
BB02-RW
2.00mm Dual Row, Surface mount Socket (Female) - BB02-RX
Active
2.00mm female header (socket)
4 to 80 contacts
Female Dual Row surface mount connector
Right angle
Profile: 4.00mm
Side entry
Without locating peg
Contact height above PCB (lower pins): 1.00mm
Perfect for planar mating with BB02-RH
Best Price!
BB02-RX
By using this site you consent to the use of cookies. See our privacy policy for more information.
Close